Blogs › Other | Mold Manufacturer

The quality of the self-made ejector is better, but the processing cost is too high. Now,...

By 2023-06-29 09:00:52 0 175

There are three main types of machine tools used in grinding: surface grinders, internal and...

By 2021-09-16 07:22:07 0 551

For large molds, due to the different filling rates in all directions, and the influence of the...

By 2023-06-29 09:23:25 0 174

When the mold is injected, the molten plastic in the mold cavity produces a huge back pressure,...

By 2023-06-29 09:32:03 0 261

Polyamide (PA)Specific gravity: PA6-1.14g/cm3 PA66-1.15g/cm3 ...

By 2021-10-18 03:48:18 0 601